Back to catalog
PTW Powder Testing Workstation
CopleyInstruments

PTW Powder Testing Workstation

Copley's PTW workstation combines six powder-flow test methods (angle of repose, orifice flow, Scott volumetry, shear cell and metal powder flow) in one unit.

Prices and availability are quoted by email or phone.

The Powder Testing Workstation (PTW) has been specifically designed to meet the standards set by USP, Ph. Eur., ASTM and ISO for powder flow testing. The PTW offers a versatile solution, integrating six powder testing methods into a single cost-effective unit, including angle of repose, orifice flow via cylinder and funnel, bulk density via Scott volumetry and shear cell, plus flowability and bulk density of metal powders (Hall, Gustavsson and Carney flowmeter).

Angle of repose

Providing a simple method for evaluating the frictional characteristics of powders, the Copley Angle of Repose module is ideal for predicting manufacturing problems associated with gravitational flow. Comprising a 100 mm diameter circular test platform along with a digital height gauge, powder heights of up to 145 mm can easily be read from the clear display. The tangent of the angle of repose (θ) is determined by measuring the height of the powder cone in mm and dividing by 50. The inverse tangent of this figure gives the angle of repose in degrees.

Orifice flow via cylinder

Comprising a 76 × 57 mm stainless steel cylinder with a 200 mL capacity, each module comes complete with 20 interchangeable stainless steel discs with a precision orifice from 4 to 36 mm.

Orifice flow tests can be performed in several ways:

  • Quantitative flow rate test based on fixed mass or fixed time, to understand powder flow uniformity and consistency
  • Intrinsic powder flow properties via a Flow Rate Index, based on comparative evaluations

Orifice flow via funnel

Designed in accordance with USP <1174> and Ph. Eur. chapters 2.9.36 and 2.9.16 for flowability, the stainless steel funnel and nozzles simulate flow in a hopper or similar production equipment.

Supplied with quick-change nozzles with 5, 7, 10, 15 and 25 mm openings, the funnel is made of pharmaceutical-grade 316 stainless steel. Tests are performed using a simple, easy-to-use shutter system.

Optional balance and timer accessories further simplify mass-versus-time testing.

Bulk density via Scott volumeter

Scott volumetry is described in both USP and Ph. Eur., and is suitable for evaluating the bulk density of a wide range of powders and granules.

A comparison between the bulk density and the tapped density of a powder provides valuable insight into its behavior during handling and storage, and can be used to calculate the well-established Carr Index and Hausner ratio.

Metal powder flow

The Metal Powder Flow module is designed to evaluate the flowability of metal powders in accordance with various ISO and ASTM standards. By incorporating the Hall, Gustavsson and Carney flow methods, it provides insight into fundamental flow properties that directly impact performance in processes such as filling, dispersion and compaction.

PTA 100i Powder Testing Assistant

The Powder Testing Assistant (PTA 100i) is an all-in-one solution designed to streamline powder testing methods. Combined with the PTW workstation, it guides users through each test method, ensuring accuracy and consistency at every step. With a built-in timer, real-time weight capture from a connected balance, and versatile reporting options, the PTA 100i speeds up workflows, minimizes user error and improves data integrity, making it the ultimate tool for reliable powder testing across a range of applications.

PTA capabilities are now also available on the JVi series of tap density testers.

More in this category